For full product details and a complete list of related downloads visit here.

The post DIN-A-MITE® D Power Controller appeared first on Eurotherm Limited.

For full product details and a complete list of related downloads visit here.

The post DIN-A-MITE® C Power Controller appeared first on Eurotherm Limited.

For full product details and a complete list of related downloads visit here.

The post DIN-A-MITE® B Power Controller appeared first on Eurotherm Limited.

For full product details and a complete list of related downloads visit here.

The post DIN-A-MITE® A Power Controller appeared first on Eurotherm Limited.

The EPower Advanced SCR (Silicon Controlled Rectifier) Power Controller uses the newest technologies and innovations to manage your process and reduce your energy costs. On every level it brings you the flexibility you need to best meet your requirements now and in the future.

Let us look after your power control for you and give you the peace of mind that you have the best for your process – even as it changes.

• Flexibility – advanced technologies in harmony with modularity and ease of use to deliver your power control needs
• Efficiency – world class power control with innovative features to minimise your energy costs with exceptional process performance
• Peace of mind – a power controller that will bring you return on investment and can be adapted in the future if your requirements change – one product for all solutions

Revolutionary modularity and configurability to meet your needs…

• Easy ordering, configuration and maintenance through modular design
• If your requirements change EPower controller can be easily adapted to meet your needs
• Minimum spares holding – many options configurable through a common driver module e.g. firing mode, load, phases, control etc.
• Up to four power control modules provide single and multi-phase control
• Software configurable options to bring you flexibility

The options that you need…

A single driver module can support up to four power modules – and hence four independent control loops.  Power modules are available in current ratings covering a range from 100A to 630A.  The driver module itself supports options boards to give you additional flexibility in your solution:

• Communications – RS485 Modbus RTU, Profibus, DeviceNet®, Modbus TCP network protocols, CCLink*, EtherNet IP* and ProfiNet*
• Predictive Load Management (PLM) – A powerful feature to effectively manage your power requirements across multiple machines to save on your energy costs. Read more about PLM.
• Flexible I/O – The driver module supports standard I/O and up to three additional I/O boards with analogue inputs, analogue outputs, digital I/O and relay outputs
• LTC – The Load Tap changer option for single phase unit applications only, allows for managing multi-tap transformers, preventing both increased harmonics and the reduction of power factor
• Energy Counter – Available over communications and for display on user screens, customers can access up to 5 scalable counters, one per individual phases and a global energy usage counter

Ideal for:

• Glass furnaces
• Melt heat treatment
• Food processing
• Multi-channel heaters
• High temperature furnaces
• Induction heating
• Plastics – Vacuum furnace

Software Config Options:

Control Type:

• Single phase
• 2 x single phase
• 3 x single phase
• 4 x single phase
• Two phase
• 2 x two phase
• True three phase

Firing Modes:

• Phase angle
• Half cycle
• Burst firing
• Fix modulation period
• Logic mode

Load Type:

• Standard Resistive
• Complex Resistive
• Inductive e.g. Transformer
• Short Wave Infrared
• Load Configuration
• Single phase
• Star
• Delta
• Star with neutral
• Open Delta

Feedback:

• V2
• I2
• True power
• RMS load voltage
• RMS load current
• Open loop
• Large extruders

The post EPower™ Controller appeared first on Eurotherm Limited.

Easy to integrate and commission, yet highly cost effective, the EFit SCR (Silicon Controlled Rectifier) Power Controller provides no compromise control for resistive and infrared heating elements. Ideal for all heating applications and fully compliant to international quality, immunity, and emissions standards, Efit power controller achieves outstanding stable, precise control in the most demanding industrial environments, even when cabinet space is at a premium.

The perfect fit for simple heating applications

Some Industrial processes such as heat treatment require precise temperatures in order to comply with regulations and it is imperative that the workpiece temperature is kept within specific limits. This can be difficult to achieve in industrial plants where the operation of large machinery can cause fluctuations in the voltage supply. In the case of resistive heaters a variation of 10% in the supply voltage will generate a 20% variation in the power to the load, resulting in undesirable temperature fluctuations. EFit SCR controller contains built in compensation that continues to apply stable power with better than ±2% linearity at the boundaries of the load, even during fluctuations in the supply. The result is a reliable, repeatable heating process and high quality end products compliant to demanding heat treatment standards.

Connect Easily

Straightforward connection and commissioning, combined with a compact format to maximise use of cabinet space makes EFit controller the perfect fit for power control in both new and retrofit applications.

Easy Installation

• Nothing to configure — plug and play
• Nothing to fix — just clip onto DIN rail
• Minimal connection — pre-wireable plug in connectors

Easy Integration

• Compact dimensions reduce cabinet costs
• Integrates worldwide — global standard approvals and international voltages
• Consistent form factor — same height and depth across the range
• Ideal form and fit drop in replacement for EurothermTE10A

Improve Processes

Designed to give a fast stable response even in heavy industrial environments, EFit SCR power controller will enable you to run continuously optimised heating processes with minimum down time. This faster throughput improves OEE (Overall Equipment Effectiveness), helping you achieve your KPIs (Key Performance Indicators).

Increase throughput

• Maximise utilisation of plant equipment thanks to fast stable control response

Reduce down time

• Reliably operates in heavy industrial conditions — high immunity to electromagnetic disturbances
• Robust — operates in high temperature, humidity and altitude environments

Control Precisely

EFit SCR controller offers built in power stabilisation and a variety of firing modes for different types of load, which lead to energy savings and higher quality end products when compared to more basic power controllers.

Reduce hidden energy costs

• No wasted energy — built in compensation provides stable power control even during power fluctuations, eliminating unexpected changes in heater temperature
• Better power factor— save hidden energy costs with dedicated firing modes for each type of load, including a variety of burst modes that provide an efficient alternative to Phase Angle, such as advanced single cycle firing to reduce flicker in short-wave infrared heaters

Consistently high quality end products that comply to standards

• No scrap or rework – linearity better than ±2% of range, accurately controls heaters and maintains the correct load temperature

Standardise Globally

EFit power controllers offer peace of mind for installers working in a global environment where industry regulations form an essential part of the engineering supply chain.

• Conformity to cUL directive (Canada and USA)
• CCC exempt: product not listed in catalogue of products subject to compulsory certification
• China RoHS
• CE compliance to power controller product standards

The post EFit SCR Power Controller appeared first on Eurotherm Limited.

End Users continually need to improve operational efficiency and productivity. EPack power controller range can deliver real savings, significantly reducing your energy costs. Get the best from your operations; quick and easy to install, integrate and commission. A compact size doesn’t compromise powerful and versatile features that minimize costs and improve productivity and quality.

EPack 3-PH power controller is the ideal solution for the control of all kinds of loads. The control of each phase ensures accurate control, even if the loads are unbalanced). The currents and voltage measures also allow a high level of diagnostics, which can be used for alarm management as well as monitoring (impedance, energy counter, reactive power).

EPack 2-PH controller is the latest generation of power controllers designed to be a cost effective solution for the control of 3 phase loads. The 2 leg control is particularly adapted to the control of balanced loads, directly, or through transformers. Burst firing avoids generation of harmonics and reduces the consumption of reactive power.

EPack 1-PH SCR controllers are designed to carry currents from 1 to 125 amps, with operating voltage between 100 and 500 Volts.

The scalability and configurability of EPack power controller range fits with the requirements of each application. A wide range of alarms can quickly identify a controller detected fault which reduces downtime.

Key Features:

• Nominal load current from 1 amp to 125 amps
• Voltage up to 500V
• Compact DIN Rail and bulkhead mounting
• Configurable via front panel or Eurotherm software (iTools)
• Plug and play Ethernet communications with Zero configuration networking (zeroconf)
• V2 , I2 or True power control
• Controls comprehensive range of loads: resistive, infrared, transformer primary, silicon carbide
• Energy usage measurement
• Advanced load diagnostics
• Integrated dual port Ethernet switch for “daisy chained” communications
• Modbus® TCP or Ethernet IP protocols
• Defend OEM knowledge and IP (OEM Security)

The post EPack™ compact SCR power controllers-1PH -2PH -3PH appeared first on Eurotherm Limited.

Whether replacing an existing product or building a new process, the EPack Lite SCR (Silicon Controlled Rectifier) power controller has been carefully designed to aid easy and fast integration in industrial systems.

The EPack Lite controller range offers a simplified choice, fast commissioning without any compromise on performance in order to provide a high level of  quality, accuracy and reliability to the process.

More than just a product, EPack Lite power controllers bring a tailored solution based on more than 50 years of  Eurotherm expertise.

> See EPack™ compact SCR power controllers brochure HA031554 to discover how full EPack range can add value to your business

The EPack Lite-1PH controller provides control of  single phase non variable resistive or primary transformer loads. It combines simplicity of  setup and operation in a compact format.

The EPack Lite-2PH controller is the latest generation of  power controllers designed to be a cost-effective solution for the control of  3 phase loads. The 2 legs control is particularly adapted to the control of  balanced loads, directly, or through transformers. Burst firing  avoids generation of  harmonics and reduces the consumption of reactive power.

The EPack Lite-3PH controller is the ideal solution for the control of non-variable resistive or primary transformer loads The control of each phase ensures accurate control, even if the loads are unbalanced. The currents and voltage measures also allow a high level of diagnostics, which can be used for alarm management.

The combination of  advanced configurable firing modes allows close matching to load characteristics to optimise process efficiency.

The post EPack™ Lite Compact SCR Power Controllers appeared first on Eurotherm Limited.