SSD1 solid state relays are single-phase DIN rail mounted relays with high-power density of up to 60 A and built-in heat sink. They are available in two configurations, namely the relay and contactor types.

The SSD1 family offers a unique range of terminal connections (input connectors: spring or screw plug-in, output terminals: telescopic, clamp cage or standard screw) providing options as per the wiring preference.

SSD1 relay, 22.5 mm/0.886 in – Relay configuration provide customers with:

• Locating slot for mounting on DIN rail
• Built-in heat sink for heat dissipation
• Control input connection terminals
• LED input status indicator
• Clip-in legend for easy identification
• Load output connection terminals

SSD1 relay, 22.5 mm/0.886 in. – Contactor configuration with pluggable (screw or spring) input connector:

• Locating slot for mounting on DIN rail
• Built-in heat sink for heat dissipation
• Load output connection terminals
• LED input status indicator
• Clip-in legend for easy identification
• Pluggable input connector (spring or screw options available)
• Telescopic screws to facilitate the use of copper lug terminal and the SSRAL1 accessory

SSD1 relay, 45 mm/1.771 in. – Contactor configuration with pluggable (screw or spring) input connector:

• Locating slot for mounting on DIN rail
• Built-in heat sink for heat dissipation
• Load output connection terminals
• LED input status indicator
• Clip-in legend for easy identification
• Pluggable input connector (spring or screw options available)
• Telescopic screws to facilitate the use of copper lug terminal and the SSRAL1 accessory

The post SSD solid state DIN rail mount relays (replace SSM1 22.5 and 45 mm width) appeared first on Eurotherm Limited.

• Industrial and commercial ovens
• Injection molding machines
• Induction Furnaces
• Solenoid/Valve Drivers
• Semiconductor manufacturing equipment
• Food processing
• Motor Controls
• ATM Machines
• Battery Chargers
• Mercury Relay Replacements

Features:

• 3 amps 12-280V ac
• High density design
• AC and DC inputs
• AC and DC outputs
• Positive and negative logic
• Single phase zero crossing
• LED logic indicator
• Output modules internally fused
• Optically isolated
• 4000 VRMS isolation on all model numbers
• CE compliant
• UL recognized
• CSA certified

The post SSLM Input/Output Modules appeared first on Eurotherm Limited.

The SSM relay range comprises:

• SSM1: Single phase SSR relays with 20, 30, 45 and 55 A ratings

SSM1 relays, 22.5 mm/0.886 in. (20 A, 30 A) width and 45 mm/1.771 in. (45 A, 55 A) width

• Lugs for panel mounting
• Built-in heat sink for heat dissipation
• Control input connection terminals
• Control input voltage LED indicator in green
• Bracket for mounting on 35 mm/1.378 in. DIN rail
• Load output connection terminals

The post SSM1 DIN Rail Mount SSRs appeared first on Eurotherm Limited.

The SSM relay range comprises:

• SSM1: Single phase SSR relays with 6 and 12 A ratings
• SSM2: Single phase dual SSR relays with 6 A rating

SSM1 relays, 12 mm/0.472 in. (6 A) width and 18 mm/0.709 in. (12 A) width

• Built-in heat sink for heat dissipation
• Control input connection terminals
• Control input voltage indicator LED in green
• Bracket for mounting on 35 mm/1.378 in. DIN rail
• Load output connection terminals
• Mounting latch

SSM2 relays, 18 mm/0.709 in. (6 A) width

• Built-in heat sink for heat dissipation
• Load output connection terminals for Channel A
• Separate input voltage indicator LED in green
• Separate control input connection terminals
• Load output connection terminals for Channel B
• Mounting latch
• Bracket for mounting on 35 mm/1.378 in. DIN rail

The post SSM1/SSM2 DIN Rail Mount SSRs (Low Amperage) appeared first on Eurotherm Limited.

Modular design of IP 20 housing and built-in heat sink for optimized operating conditions.
Easy mounting on standard 35 mm/1.378 in. DIN rail with a secure mounting latch.

Compact design

Enhanced modular solution

Three-phase option and current rating of 25A.
Zero Voltage switching for resistive loads and Random switching for inductive loads.
UL and cUL approved including the general purpose and motor controller rating standards.

The post SSM3 DIN Rail Mount SSRs appeared first on Eurotherm Limited.

SSP1 relays

SSP solid state relays are single-phase panel mount relays that
offer complete solid state control and switching solutions.

• Easy product selection with simplified product nomenclature and direct heat sink
  selection available in product data sheets.
• Wide choice of heat sinks with thermal resistance ratings of 2.5 °C/W to 0.2 °C/W.

The post SSP1 Panel Mount SSRs appeared first on Eurotherm Limited.

• Load output connection screw terminals
• Control input connection screw terminals
• Control input voltage LED indicator
• Factory-fit thermal pad that is glued on the rear of the product
• 25A and 50A units
• 530Vac rating
• Zero cross and random switching

The post SSP3 Panel Mount SSRs appeared first on Eurotherm Limited.

SSL relays provide customers with:

• Relay and socket selection as per operating voltage of the application.
• Available with Zero Voltage switching for resistive load and Random switching for inductive load applications.
• Simple and easy maintenance as the relays can be retained/released by locking/unlocking the lever without disconnecting the socket wiring.
• Socket with reverse polarity protection circuit and LED indicator for easy identification of control status.

SSL slim solid state relays

• Relay with 1 N/O contact and any one of the following ratings:
• 24 V c, 3.5 A
• 48 V c, 100 mA
• 280 V a, 2 A
• Four flat, reinforced pins (PCB type)
• 5 mm/0.197 in. relay width for up to 3.5 A of load current
• Five female contacts for the relay pins
• 6.2 mm/0.244 in. socket width
• Lever for retaining or easy removal of the relay from its socket with clip-on marker label
• Wire connection by screw connectors or spring terminals
• Reverse polarity protection circuit and LED indicator are built into the socket
• Locating slot for mounting on DIN rail

Slim relay-socket solution

• Complete range of control input and load output configuration for both AC and DC switching applications.
• Compact solution with 6 mm/0.236 in. width, allow customers to choose the combination of relays with associated sockets from wide range of available offer.

Enhanced performance in any situation

• Socket with integrated reverse polarity protection circuit and control input status/relay status LED indicator.
• IP 67 designed and fully encapsulated.

Simplified installation and mounting

• Locking/unlocking lever for replacing relay from the socket.
• Simple mounting on DIN rail.
• Choice of screw connector and spring terminal connection for sockets.

The post SSL1 Slim Socket SSRs appeared first on Eurotherm Limited.