Watlow Featured Products and Software | Eurotherm Limited Temperature Control, Process Control, Measurement and Data Recording Solutions Wed, 07 Jun 2023 08:19:57 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.2 Flange Immersion Heaters https://www.eurotherm.com/us/products/heaters-us/immersion-heaters-us/flange-immersion-heaters/ Tue, 14 Mar 2023 19:30:59 +0000 https://www.eurotherm.com/?post_type=product&p=145036 ANSI Flange Tubular Heaters Ideal For Heating Liquids, Gases, Tanks and Pressure Vessels Requiring Higher Kilowatts

Available sizes:

3"-8" (7.62 cm - 20.32 cm) with Baffles

3"-8" (7.62 cm - 20.32 cm) without Baffles

10"-14" (25.4 cm - 35.56 cm)

The post Flange Immersion Heaters appeared first on Eurotherm Limited.

]]> Watlow flanged immersion heaters are easy to install and maintain. Designed for heating liquids and gases in tanks and pressure vessels, ANSI flanged immersion heaters are ideal for applications requiring higher kilowatts. Watlow flanged immersion heaters are made with WATROD or FIREBAR tubular elements brazed or welded to a flange. Stock flange heaters are equipped with a general purpose terminal enclosure. Flanged immersion heaters, with FIREBAR elements, also answer the need for liquid immersion applications requiring high kilowatts in small tanks. The FIREBAR element’s unique flat surface geometry packs more power in a smaller bundle, with lower watt density, making it especially well-suited for petroleum-based liquid heating applications.

For full product details and a complete list of related downloads click below.

3″-8″ Flange Heaters with Baffles
3″-8″ Flange Heaters without Baffles
10″-14″ Flange Heaters

Description Information
Material Alloy 800
Maximum Operating Temperature – C 870
Maximum Operating Temperature – F 1600
Maximum Watt Densities 15.5
Maximum Watt Densities 100

 

Description Information
Material N/A
Maximum Operating Temperature – C 175
Maximum Operating Temperature – F 350
Maximum Watt Densities 15.5
Maximum Watt Densities 100

 

Description Information
Material Stainless Steel
Maximum Operating Temperature – C 650
Maximum Operating Temperature – F 1200
Maximum Watt Densities 15.5
Maximum Watt Densities 100

 

Description Information
Material Steel
Maximum Operating Temperature – C 400
Maximum Operating Temperature – F 750
Maximum Watt Densities 15.5
Maximum Watt Densities 100

The post Flange Immersion Heaters appeared first on Eurotherm Limited.

]]> Flange Circulation Heaters https://www.eurotherm.com/us/products/heaters-us/flange-circulation-heaters/ Fri, 10 Mar 2023 21:15:18 +0000 https://www.eurotherm.com/?post_type=product&p=145019 WATROD™ and FIREBAR® Heaters Designed to Heat Forced-Circulation Air, Gases or Liquids

Sizes available:

3'"- 8" with baffles

3'"- 8" without baffles

10'"- 14"

The post Flange Circulation Heaters appeared first on Eurotherm Limited.

]]> Circulation heaters provide a ready-made means to install electric heating with a minimal amount of time and labor. This is accomplished by combining heating elements, vessel, insulation, terminal enclosure, mounting brackets and inlet and outlet connections into a complete assembly. Made from ANSI flange heater assemblies mated with a pressure vessel (tank), circulation heaters are designed to heat forced-circulation air, gases or liquids. Ideal for either in-line or side-arm operations, these assemblies direct fluids past FIREBAR or WATROD heating elements, to deliver fast response and even heat distribution. Watlow meets virtually all your circulation heater assembly needs with made-to-order units. These units can be made from a wide range of heating element sheath materials, wattages, vessel sizes and materials, pressure ratings, terminal enclosures and controls.

For full product details and a complete list of related downloads click below.

3′” – 8″ Flange Heaters with Baffles
3′” – 8″ Flange Heaters without Baffles
10′” – 14″ Flange Heaters

 

Description Information
Material 316 Stainless Steel
Maximum Operating Temperature – C 650
Maximum Operating Temperature – F 1200
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material Alloy 800/400
Maximum Operating Temperature – C 870
Maximum Operating Temperature – F 1600
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material N/A
Maximum Operating Temperature – C 175
Maximum Operating Temperature – F 350
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material Steel
Maximum Operating Temperature – C 400
Maximum Operating Temperature – F 750
Maximum Watt Densities 18.6
Maximum Watt Densities 120

The post Flange Circulation Heaters appeared first on Eurotherm Limited.

]]> FIREROD® Cartridge Heater https://www.eurotherm.com/us/products/heaters-us/firerod-cartridge-heater/ Fri, 10 Mar 2023 20:18:24 +0000 https://www.eurotherm.com/?post_type=product&p=145006 FIREROD Cartridge Heaters are the Premier Choice in Swaged Cartridge Heating

Sizes available:

1/8" (3.175 mm)

1/4" (6.35 mm)

3/8" (9.525 mm)

1/2" (12.7 mm)

3/4" (19.05 mm)

The post FIREROD® Cartridge Heater appeared first on Eurotherm Limited.

]]> The FIREROD cartridge heater revolutionized the heating element industry in 1954 when it was patented as the first swaged cartridge heater. The mechanical procedure of swaging reduces the diameter of the heater by compacting the unit; this directly improves the heat transfer and efficiency of the heater. FIREROD cartridge heaters are built using only the finest materials and construction methods and are backed with extensive quality assurance programs. With premium materials and tight manufacturing controls, the FIREROD heater provides superior heat transfer, uniform temperatures, resistance to oxidation and corrosion and a long life even at high temperatures. FIREROD offers many delivery programs to meet your needs.

For full product details and a complete list of related downloads click below.

1/8″ FIREROD Cartridge Heater
1/4″ FIREROD Cartridge Heater
3/8″ FIREROD Cartridge Heater
1/2″ FIREROD Cartridge Heater
3/4″ FIREROD Cartridge Heater

 

1/4″, 3/8″, 1/2″ and 3/4″ FIREROD Cartridge Heater

Description Information
Material Alloy 800
Maximum Operating Temperature – C 760
Maximum Operating Temperature – F 1400
Maximum Watt Densities 62
Maximum Watt Densities 400

 

Description Information
Material Stainless Steel
Maximum Operating Temperature – C 538
Maximum Operating Temperature – F 1000
Maximum Watt Densities 62
Maximum Watt Densities 400

 

1/8″ FIREROD Cartridge Heater

 

Description Information
Material Alloy 600
Maximum Operating Temperature – C 760
Maximum Operating Temperature – F 1400
Maximum Watt Densities 62
Maximum Watt Densities 400

The post FIREROD® Cartridge Heater appeared first on Eurotherm Limited.

]]> D SERIES Duct Heaters https://www.eurotherm.com/us/products/products-us/d-series-duct-heaters/ Fri, 10 Mar 2023 16:48:37 +0000 https://www.eurotherm.com/?post_type=product&p=144492 Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted to many non-pressurized air-heating systems.

The post D SERIES Duct Heaters appeared first on Eurotherm Limited.

]]> Duct heaters are easily installed in applications requiring a wide range of temperature versus air flow combinations.

The modular duct heater offers increased reliability. The individual modules are removable through the housing of the assembly, which eliminates the need to pull the complete heater from the duct work. This reduces downtime costs because the heating elements can be replaced individually. Performance improvements include quicker response time and reduced infiltration from the air stream being heated into the electrical enclosure.

Watlow® duct heaters offer advantages over gas or oil fired and open coil electric units with:

  • Installation flexibility—no flues or fuel lines
  • 100% energy efficient—no energy loss up the flue
  • Universal availability of electricity
  • Resistance coil in sheath is protected from corrosive environments

For full product details and a complete list of related downloads click here.

The post D SERIES Duct Heaters appeared first on Eurotherm Limited.

]]> Screw Plug Immersion Heaters https://www.eurotherm.com/us/products/products-us/screw-plug-immersion-heaters/ Tue, 07 Mar 2023 21:38:41 +0000 https://www.eurotherm.com/?post_type=product&p=144638 Ideal for Direct Immersion Heating of Liquids

The post Screw Plug Immersion Heaters appeared first on Eurotherm Limited.

]]> Screw plug immersion heaters are ideal for direct immersion heating of liquids, including all types of oils and heat transfer solutions. Available in a variety of sizes, Watlow screw plug immersion heaters feature both WATROD round and FIREBAR flat tubular elements. Heating elements are hairpin bent and either welded or brazed into the screw plug, depending on element sheath and plug material compatibility. General purpose terminal enclosures are standard with optional moisture resistant, explosion resistant and explosion/moisture resistant enclosures available to meet specific application needs. Optional thermostats provide convenient process temperature regulation to the screw plug immersion heater.

For full product details and a complete list of related downloads click here.

Description Information
Material Alloy 800/840
Maximum Operating Temperature – C 870
Maximum Operating Temperature – F 1600
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material N/A
Maximum Operating Temperature – C 175
Maximum Operating Temperature – F 350
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material Stainless Steel
Maximum Operating Temperature – C 650
Maximum Operating Temperature – F 1200
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material Steel
Maximum Operating Temperature – C 400
Maximum Operating Temperature – F 750
Maximum Watt Densities 18.6
Maximum Watt Densities 120

The post Screw Plug Immersion Heaters appeared first on Eurotherm Limited.

]]> Screw Plug Circulation Heaters https://www.eurotherm.com/us/products/products-us/screw-plug-circulation-heaters/ Tue, 07 Mar 2023 21:29:42 +0000 https://www.eurotherm.com/?post_type=product&p=144625 WATROD™ and FIREBAR® Heaters Designed to Heat Forced-Circulation Air, Gases or Liquids

The post Screw Plug Circulation Heaters appeared first on Eurotherm Limited.

]]> Circulation heaters provide a ready-made means to install electric heating with a minimal amount of time and labor. This is accomplished by combining heating elements, vessel, insulation, terminal enclosure, mounting brackets and inlet and outlet connections into a complete assembly. Made from NPT screw plug heater assemblies mated with a pressure vessel (tank), circulation heaters are designed to heat forced-circulation air, gases or liquids. Ideal for either in-line or side-arm operations, these assemblies direct fluids past FIREBAR or WATROD heating elements, to deliver fast response and even heat distribution. Watlow meets virtually all your circulation heater assembly needs with made-to-order units. These units can be made from a wide range of heating element sheath materials, wattages, vessel sizes and materials, pressure ratings, terminal enclosures and controls.

For full product details and a complete list of related downloads click here.

 

Description Information
Material 316 Stainless Steel
Maximum Operating Temperature – C 650
Maximum Operating Temperature – F 1200
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material Alloy 800/400
Maximum Operating Temperature – C 870
Maximum Operating Temperature – F 1600
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material N/A
Maximum Operating Temperature – C 175
Maximum Operating Temperature – F 350
Maximum Watt Densities 18.6
Maximum Watt Densities 120

 

Description Information
Material Steel
Maximum Operating Temperature – C 400
Maximum Operating Temperature – F 750
Maximum Watt Densities 18.6
Maximum Watt Densities 120

The post Screw Plug Circulation Heaters appeared first on Eurotherm Limited.

]]> D4T Data Logger with INTUITION® https://www.eurotherm.com/us/products/products-us/d4t-data-logger-with-intuition/ Tue, 07 Mar 2023 21:19:00 +0000 https://www.eurotherm.com/?post_type=product&p=144612 Watlow’s D4T with INTUITION® Combines the Flexibility of a Modular I/O Data Logger with Best-in-Class Ease of Use

The post D4T Data Logger with INTUITION® appeared first on Eurotherm Limited.

]]> The D4T with INTUITION® data logger from Watlow® offers a data logger with a wide range of field removable I/O modules for maximum design flexibility – allowing users to only pay for what they need. Configurations can be custom tailored to meet the scaling needs of a tremendous range of equipment and applications while providing exactly the hardware types required for compatibility. The D4T data logger also features a 4.3 inch, color, graphical touch panel. Combining power, flexibility and functionality, this new data logger offers unmatched versatility, and its best-in-class ease of use could very well make user manuals a thing of the past.

For full product details and a complete list of related downloads click here.

The post D4T Data Logger with INTUITION® appeared first on Eurotherm Limited.

]]> Tube and Wire Thermocouples https://www.eurotherm.com/us/products/products-us/tube-and-wire-thermocouples/ Tue, 07 Mar 2023 21:06:16 +0000 https://www.eurotherm.com/?post_type=product&p=144599 Thermocouple Designs Ideal For Medium-Duty Processes

The post Tube and Wire Thermocouples appeared first on Eurotherm Limited.

]]> Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and metals rely on Watlow thermocouples. Watlow designs and manufactures sensors to meet customers’ industrial and commercial equipment needs. Watlow has developed an extensive line of thermocouples to meet a broad range of sensing needs. Our extensive line of thermocouples feature flexible SERV-RITE® wire insulated with woven fiberglass or high temperature engineered resins. For added protection against abrasion, products can be provided with stainless steel wire braid and flexible armor. ASTM E230 color-coding identifies standard catalog thermocouple types. The addition of a metal sheath over the thermocouple provides rigidity for accurate placement and added protection of the sensing junction. Mounting options include springs, ring terminals, specialized bolts, pipe style clamps and shims.

For full product details and a complete list of related downloads click here.

The post Tube and Wire Thermocouples appeared first on Eurotherm Limited.

]]> RTDs (Resistance Temperature Detectors) https://www.eurotherm.com/us/products/products-us/rtds-resistance-temperature-detectors/ Tue, 07 Mar 2023 20:46:59 +0000 https://www.eurotherm.com/?post_type=product&p=144586 Resistance Temperature Detectors (RTDs) Ensure Precise and Repeatable Temperature Measurement

The post RTDs (Resistance Temperature Detectors) appeared first on Eurotherm Limited.

]]> Watlow manufactures a variety of resistance temperature detectors (RTD) sensors that are specially designed to ensure precise and repeatable temperature measurement. Watlow sensors are built to meet the most demanding industrial applications while providing a lower total cost of ownership for our customers.

For full product details and a complete list of related downloads click here.

The post RTDs (Resistance Temperature Detectors) appeared first on Eurotherm Limited.

]]> Mineral Insulated Thermocouples https://www.eurotherm.com/us/products/products-us/mineral-insulated-thermocouples/ Tue, 07 Mar 2023 20:41:50 +0000 https://www.eurotherm.com/?post_type=product&p=144573 Fast-Responding, Durable and Capable of Handling High Temperatures

The post Mineral Insulated Thermocouples appeared first on Eurotherm Limited.

]]> Manufactured with best-in-class XACTPAK®, Watlow’s trademark for metal sheathed, mineral insulated (MI) thermocouple material, XACTPAK responds fast because the protective metal outer sheath allows use of smaller diameter thermocouple conductors. The rock hard compacted MgO insulation further enhances the sensor’s ability to “read” temperature by transferring heat quickly to the measuring junction.

For full product details and a complete list of related downloads click here.

The post Mineral Insulated Thermocouples appeared first on Eurotherm Limited.

]]>