Probes | Eurotherm Limited Temperature Control, Process Control, Measurement and Data Recording Solutions Thu, 15 Dec 2022 17:04:05 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.2 AirRef Enclosure https://www.eurotherm.com/us/products/ancillary-equipment-us/probes-us/airref/ Thu, 01 Oct 2020 16:34:19 +0000 https://eurothermdev.co.uk/products/uncategorized/airref/ The Eurotherm AirRef enclosure provides a continuous reference air supply to support the standard operation of the AP1 Carbon Probe. It also provides a burn off air (purge) supply to enable the cleaning and/or maintenance of the AP1 Carbon Probe, when required.

The post AirRef Enclosure appeared first on Eurotherm Limited.

]]> Two variants are available depending on local power requirements:

AR100 110Vac / 60Hz, 21W
AR200 230Vac / 50Hz, 21W

The post AirRef Enclosure appeared first on Eurotherm Limited.

]]> AP1 In-Situ Carbon Probe https://www.eurotherm.com/us/products/ancillary-equipment-us/probes-us/ap1-in-situ-carbon-probe/ Mon, 15 Oct 2018 08:50:37 +0000 https://eurotherm.com/product/ap1-in-situ-carbon-probe/ The AP1 Carbon Probe is a consumable item, like a thermocouple, which is mounted with its tip in contact with the furnace atmosphere, ideally close to the working zone. The probe produces an output voltage which, in conjunction with the process temperature and atmosphere, can be interpreted in terms of the atmosphere carbon potential of the furnace. The probe is designed to be used with controllers with a high impedance input. The Eurotherm AirRef enclosure provides a continuous reference air supply to support the standard operation of the probe.

The post AP1 In-Situ Carbon Probe appeared first on Eurotherm Limited.

]]> The AP1 Carbon Probe is a consumable item, like a thermocouple, which is mounted with its tip in contact with the furnace atmosphere, ideally close to the working zone. The probe produces an output voltage which, in conjunction with the process temperature and atmosphere, can be interpreted in terms of the atmosphere carbon potential of the furnace. The probe is designed to be used with controllers with a high impedance input. The Eurotherm AirRef enclosure provides a continuous reference air supply to support the standard operation of the probe.

The post AP1 In-Situ Carbon Probe appeared first on Eurotherm Limited.

]]>