• Paperless graphical recorders – 6000 series
• Hybrid recorders/controllers – nanodac™ recorder/controller
• Programmable Automation Controllers – T2750 PAC

Learn how Data Reviewer can optimize operational efficiency and improve data integrity here.

Watch videos
More information

Overview

Scheduled Reports

OPC UA

Batch Search

Viewing and Analyzing

User Management

Auditor

The post Data Reviewer appeared first on Eurotherm Limited.

• High Performance Controller
• Historian “Store & Forward”
• High Integrity data recording
• Redundancy
• Integration
• Multi-Setpoint Programmer
• Enterprise Control System

Key Capabilities:

• Redundant operation with E-Sync technology
• “Store & Forward” data recording at I/O level with AVEVA Historian
• IEC61131-3 style software tools with rich function block library

The post T2750 PAC appeared first on Eurotherm Limited.

The Eurotherm nanodac™ recorder/controller offers four channels of precision analogue batch recording, easily meeting the requirements of regulators for accuracy and repeatability, and data logging requirements of 21 CFR 11. For more demanding applications, the Versadac recorder provides a back of panel solution with almost unlimited capacity. Both allow alarm and discrete input logging, communications with other devices, results available in the data record, electronic signatures and batch data recording.

EtherNET/IP Client or Server mode

Available as an option, the nanodac recorder/controller can be easily integrated with an existing instrument network and act as local data historian. When enabled, EtherNet/IP allows the nanodac to act as either a Client or a Server and provides data recording for up to 30 process parameters (via virtual channels). EtherNet/IP provides two user pages, the first is an overview of all the process parameters (data points) being addressed via the communications. The second is a diagnostics page that can be used during initial setup and commissioning, to test the connection, between the Client and/or Server.

3 x Isolated DC Outputs (DDD)

This release provides support for Isolated DC Outputs in option slots OP1, OP2 and OP3. Please refer to the Installation sheet or User Guide for wiring instructions.

Washdown Front

An optional IP66 rated Wash-down bezel has been made available in this release, making the nanodac suitable for applications in Food & Beverage or CIP/SIP.

Crystal clear, colour display

The 3.5” TFT display offers incredibly clear visualisation of process parameters with a wide selection of configurable views to best suit the application. Views include: Horizontal and vertical trends; Horizontal and vertical bar graphs; Numeric; Alarm panel, Alarm status, and control loops. The unit also provides user wiring from the front of the product for detailed configuration without the need to connect to a PC.

Data Acquisition and Recording

The nanodac recording functionality utilises the secure strategies and UHH format developed by Eurotherm through years of recording expertise. As well as multiple real-time views and historical review on the product, multiple data archiving strategies are provided utilising the 50MB onboard Flash memory, removable USB and data transfer via FTP to a specified server.

The four universal input channels provide high accuracy (suitable for use in Nadcap applications) and 125ms parallel sampling. An additional 30 virtual channels can be utilised to provide maths, counter, slave communications and totaliser functionality within the instrument.

Eurotherm Data Reviewer is the ideal choice for the viewing, analysis and printing of historical data files acquired from Eurotherm data acquisition equipment.

PID Control Loops

The nanodac instrument can also provide two independent control loops (optional). This control functionality utilises the advanced Eurotherm PID algorithm providing high performance and reliability to your process. Functionality includes one of the best autotune facilities available along with overshoot inhibition (cutbacks); compensation for power fluctuations using power feedforward; linear, fan, oil and water cooling.

Heat Treatment is one of the many processes that often need to vary the setpoint of the control process over a set period of time; this is achieved by using a set-point program. The nanodac offers an optional Dual Programmer supporting up to 100 programs locally, each program supporting 25 segments. The nanodac also provides remote access to a further 100 programs that can be easily retrieved via FTP or USB memory stick.

The post nanodac™ Recorder / Controller appeared first on Eurotherm Limited.

The EPower Advanced SCR (Silicon Controlled Rectifier) Power Controller uses the newest technologies and innovations to manage your process and reduce your energy costs. On every level it brings you the flexibility you need to best meet your requirements now and in the future.

Let us look after your power control for you and give you the peace of mind that you have the best for your process – even as it changes.

• Flexibility – advanced technologies in harmony with modularity and ease of use to deliver your power control needs
• Efficiency – world class power control with innovative features to minimise your energy costs with exceptional process performance
• Peace of mind – a power controller that will bring you return on investment and can be adapted in the future if your requirements change – one product for all solutions

Revolutionary modularity and configurability to meet your needs…

• Easy ordering, configuration and maintenance through modular design
• If your requirements change EPower controller can be easily adapted to meet your needs
• Minimum spares holding – many options configurable through a common driver module e.g. firing mode, load, phases, control etc.
• Up to four power control modules provide single and multi-phase control
• Software configurable options to bring you flexibility

The options that you need…

A single driver module can support up to four power modules – and hence four independent control loops.  Power modules are available in current ratings covering a range from 100A to 630A.  The driver module itself supports options boards to give you additional flexibility in your solution:

• Communications – RS485 Modbus RTU, Profibus, DeviceNet®, Modbus TCP network protocols, CCLink*, EtherNet IP* and ProfiNet*
• Predictive Load Management (PLM) – A powerful feature to effectively manage your power requirements across multiple machines to save on your energy costs. Read more about PLM.
• Flexible I/O – The driver module supports standard I/O and up to three additional I/O boards with analogue inputs, analogue outputs, digital I/O and relay outputs
• LTC – The Load Tap changer option for single phase unit applications only, allows for managing multi-tap transformers, preventing both increased harmonics and the reduction of power factor
• Energy Counter – Available over communications and for display on user screens, customers can access up to 5 scalable counters, one per individual phases and a global energy usage counter

Ideal for:

• Glass furnaces
• Melt heat treatment
• Food processing
• Multi-channel heaters
• High temperature furnaces
• Induction heating
• Plastics – Vacuum furnace

Software Config Options:

Control Type:

• Single phase
• 2 x single phase
• 3 x single phase
• 4 x single phase
• Two phase
• 2 x two phase
• True three phase

Firing Modes:

• Phase angle
• Half cycle
• Burst firing
• Fix modulation period
• Logic mode

Load Type:

• Standard Resistive
• Complex Resistive
• Inductive e.g. Transformer
• Short Wave Infrared
• Load Configuration
• Single phase
• Star
• Delta
• Star with neutral
• Open Delta

Feedback:

• V2
• I2
• True power
• RMS load voltage
• RMS load current
• Open loop
• Large extruders

The post EPower™ Controller appeared first on Eurotherm Limited.

The 6180A offers unrivalled input accuracy with a 125ms total sample rate for up to 48 input channels. Input channels are freely configurable to suit your process requirements. Each instrument has an intuitive, touch screen display to enable operators to clearly view process data in varying formats.

All have onboard Flash data storage capability, Ethernet communication and choice of Compact Flash or SD Card. Data is stored in a tamper resistant binary format that can be used for secure, long term records of your process.

The 6000 Series fits a wide spectrum of applications by offering fully featured software options and flexible I/O, which can be added to at any time. A unique ‘trial mode’ feature removes the constraints of the purchased options, allowing you to simply ‘try before you buy’.

Touch screen display

The 6000 Series HMI is easy and intuitive to use ensuring faster productivity and minimal learning requirements. It also incorporates a ‘Pop Up’ full ‘QWERTY’ keyboard to facilitate easy data or message entry. There are no complicated button presses, you can create your own operator buttons, anywhere on the display. Use of intuitive drop down menus aid consistent navigation.

Extensive communications

Communications flexibility is the cornerstone of solutions in today’s challenging Global market.  The 6000 Series can be accessed via a Local Area Network, dial-up connection, Intranet or Internet.

Built-in data protection and traceability

Your most valuable asset is the data collected for process and legislation purposes. Protection includes Audit Trail for 21CFR Part 11 and Nadcap applications, with recorded login, use of unique usernames and passwords.

Other options include: Portable versions

Ideal for:

• 21 CFR Part 11 Life Sciences applications
• AMS2750F Heat Treatment applications
• Power generation
• Water / waste water
• Sterilizers / autoclaves

Features:

• 12.1″ XGA touchscreen display
• Custom graphic displays
• Remote viewing / configuration
• Batch functions
• Adaptive recording
• Math functions
• Totalizers, timers, counters
• Groups
• Time synchronization (SNTP)
• Audit trail
• Electronic signatures
• Security Manager
• FTP client/server
• Ethernet communications
• Serial communications
• Event inputs
• Email / SMS notification
• Web server

Eurotherm Data Reviewer is the ideal choice for the viewing, analysis and printing of historical data files acquired from Eurotherm data acquisition equipment.

The post 6100A / 6180A Paperless Graphic Recorder appeared first on Eurotherm Limited.